BYD F3DM Owner's Manual download pdf (Page 197)

- 197 -

F3DM Owner’s Manual

of magnesia, beaten raw egg

or vegetable oil. Then go

immediately for emergency help.

Check Auxiliary Battery Appearance

Electrode contact

Battery-pressing

board

Earth wire

Check whether the battery and its

terminal is corroded, loose, cracked or

has loose hold-down clamp.

a. If the battery is corroded, wash it

off with a solution of warm water and

baking soda. Coat the outside of the

terminals with grease to prevent further

corrosion.

b. If terminal is loose, tighten its clamp

nuts; but do not overtighten.

c. Tighten the hold–down clamp only

enough to keep the battery firmly in

place. Overtightening may damage the

battery case.

NOTICE

y

Make sure the power system and

all accessories are cut off before

performing maintenance.

y

When checking the battery,

remove the ground cable from

the negative terminal (“–” mark)

rst and reinstall it last.

y

Do not cause short circuit when

using tools.

y

Make sure no solution gets into

the battery when washing it.

Check the Internal Status of Battery

Check the internal status of the battery

according to instructions on the outer

shell and status indicators of the

battery.

NOTICE

y

Charging the battery without

disconnecting the wires may

cause serious damage on ECU

and other electrical devices on

the vehicle. Remove the battery

wires first before connecting the

battery to charger.

y

When the engine is not running,

use electrical devices for a long

time may cause over discharge

of the battery, which may lead to

difficulty to start the car or even

permanent damage to the battery.

使用手册小330.indd197 2011-4-1318:36:56

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 213 214

Comments to this Manuals

No comments