BYD F6 Owner's Manual download pdf (Page 60)

F6 OWNER’S MANUAL

57

When heating, the HI or LO indicator will

be always bright until you press the

opposite side of the switch to close the

heating.

In HI, turns off the heater when the seat gets

warm; and turn back on after the seat

temperature drops. If only in HI, this will

continue. The HI indicator also will be

bright to remind you the heating device is in

HI.

In LO, the heating device will continue to

heat, and don’t change with the temperature.

Follow these precaution whenever you use

the seat heaters：

1．Use the heat setting only to heat the seats

quickly, when the seat gets warm, select the

LO. Because it draws large amount of

current from the battery.

2．If the engine is left idling for an extended

period, don’t use the heater even on the LO

setting, it can weaken the battery, causing

the hard starting.

Power window

The car is equipped with the power window.

Turn the ignition switch to ON( ) position Ⅱ

to raise or lower any window .

To open the window, push the switch down

and hold it. Release it when you want to

stop the window. Pull back on the switch

and hold it to close the window.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 214 215

Comments to this Manuals

No comments